SKU: 56552614022
kinderfahrrad early rider 20 zoll

kinderfahrrad early rider 20 zoll Early Rider Seeker 20 | 20" kids mountainbike

$19.42 $21.58
Save 10%
No.2 Bestseller on infocentre.info >

Pay in installments of $5.39 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Oct 10 - Oct 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

kinderfahrrad early rider 20 zoll Early Rider Seeker 20 | 20" kids mountainbikeSeek and ye shall find. The Seeker 20 is built for exploring rugged trails and off road terrain. Continuing with the geometry up grades such a lower bottom bracket for improved stability, slacker headtube angles for precise handling and wider tire clearance this bike is made for confident riders. The 8 Speed Shimano drivetrain with 11 36t gear ratio and short 110mm crank arms offers smooth, efficient pedalling. Equipped with powerful Tektro 160mm

Seek and ye shall find.

The Seeker 20 is built for exploring rugged trails and off-road terrain. Continuing with the geometry up grades such a lower bottom bracket for improved stability, slacker headtube angles for precise handling and wider tire clearance  this bike is made for confident riders. The 8 Speed Shimano drivetrain with 11-36t gear ratio and short 110mm crank arms offers smooth, efficient pedalling. Equipped with powerful Tektro 160mm hydraulic disc brakes, sealed bearing wheels with bolt-thru axles, and grippy Schwalbe Smart Sam 2.3" tires, this bike is ready for any challenge and can tackle any adventure with ease and comfort.

ASSEMBLY INSTRUCTIONS:

Your bike will arrive carefully packaged and boxed with the rear wheel attached. The front wheel will need attaching using the skewer supplied. The handlebar will be zip tied to the top tube, simply remove the bars and all packaging and attach to the stem. Add the saddle and adjust to the required height. Then simply add the pedals. Please retain your manual.

[Left column]

INSIDE LEG

54CM

FRAME

HAND BRUSHED AL6061, FORGED SLIDING DROP OUTS

FORK

HAND BRUSHED AL6061, FORGED DROP OUTS

STEERER TUBE

AL6061

CRANKS

CRUX 110MM DIRECT MOUNT, NARROW Q FACTOR

PEDALS

ER CNC'D AL6061, PLATFORM, STUDDED, CARTRIDGE BEARING

BOTTOM BRACKET

CRUX 24MM EXTERNAL CUP

RIMS

20 X 28H, DOUBLE WALLED TUBELESS COMPATIBLE

REAR HUB

FOUR-BEARING CASSETTE FREEHUB, CNC'D AL6061

FRONT HUB

CNC’D 6 BOLT DISC, AL6061, QR SKEWER

CHAIN

KMC X8

CHAINRING

DIRECT MOUNT, NARROW WIDE 30T, ALLOY

REAR CASSETTE

SHIMANO 8-SPEED 11-34t

SHIFTER

SHIMANO 8-SPEED TRIGGER

 

*Every effort has been made to ensure accuracy throughout this website. However, Early Rider reserves the right to change prices and bike specifications without prior notice*

CLICK HERE TO VIEW THE USER MANUAL


[Right column]

WEIGHT

8.8KGS W/O PEDALS

DERAILLEUR

SHIMANO ALTUS 8-SPEED MECH

BRAKES

TEKTRO HYDRAULIC DISC, 160 ROTORS

LEVERS

TEKTRO SHORT REACH

FRONT TYRE

SCHWALBE SMART SAM 20x2.35", 67TPI WB

REAR TYRE

SCHWALBE SMART SAM 20x2.35", 67TPI WB

HEADSET

1 1/8” CARTRIDGE BEARING, CONVENTIONAL

STEM

FORGED AL6061, 35MM REACH, 6-BOLT

BARS

560MM DOUBLE BUTTED AL6061, 25MM RISE

GRIPS

ER LOCK ON KRATON 92MM

SEAT POST

27.2MM x 250MM AL6061

SADDLE

ER WING 2, RAILED

SEAT CLAMP

QR, 31.8MM 

 

[Table]
STANDOVER HEIGHT  54CM
FRAME HAND BRUSHED AL6061, FORGED SLIDING DROP OUTS
FORK HAND BRUSHED AL6061, FORGED DROP OUTS
STEERER TUBE AL6061
CRANKS CRUX 110MM DIRECT MOUNT, NARROW Q FACTOR
PEDALS ER CNC'D AL6061, PLATFORM, STUDDED, CARTRIDGE BEARING
BOTTOM BRACKET CRUX 24MM EXTERNAL CUP
RIMS 20 X 28H, DOUBLE WALLED TUBELESS COMPATIBLE
REAR HUB FOUR-BEARING CASSETTE FREEHUB, CNC'D AL6061
FRONT HUB CNC’D 6 BOLT DISC, AL6061, QR SKEWER
AXLES AL6061
CHAIN KMC X8
CHAINRING
 DIRECT MOUNT, NARROW WIDE 30T, STEEL
WEIGHT 8.8KGS W/O PEDALS
REAR CASSETTE SHIMANO 8-SPEED 11-34T
BRAKES TEKTRO HYDRAULIC DISC, 160 ROTORS
LEVERS TEKTRO SHORT REACH
FRONT TYRE SCHWALBE SMART SAM 20x2.35", 67TPI WB
REAR TYRE SCHWALBE SMART SAM 20x2.35", 67TPI WB
HEADSET 1 1/8” CARTRIDGE BEARING, CONVENTIONAL
STEM FORGED AL6061, 35MM REACH
BARS 560MM DOUBLE BUTTED AL6061, 25MM RISE
GRIPS ER LOCK ON KRATON 92MM
SEAT POST QR, 31.8MM
SADDLE ER WING 2, RAILED
SEAT CLAMP ER BOLT, 28.6MM 
DERAILLEUR SHIMANO ALTUS 8-SPEED MECH
SPEC NOTICE Every effort has been made to ensure accuracy throughout this website. However, Early Rider reserves the right to change prices and bike specifications without prior notice
[Table spec]
A Wheelbase 870mm
B Head Angle 67°
C Seat Tube Length 270mm
D Chainstay Length 340mm
E Seat Tube Angle 73°
F Standover Height 510mm
G Top Tube Length 452.6mm
H Head Tube Length
 92mm
I Stack 422.9mm
J Reach 323.3mm
K Fork Length 340mm

    Shipping Notes
    • Free Standard Shipping on $100+ Orders to the USA.
    • Except Preorder products are shipped in 48 hours.
    • Delivery to the USA:
    1. Standard Shipping : 3-10 business days
    • If time is of the essence, please consider selecting expedited delivery for faster service.
    Exchange/Return Notes
    • We offer a 30-day return/exchange service after receiving.
    • Final sale items are not eligible for returns or exchanges.
    • To process your return/exchange, please contact us at [email protected]
    • Please click here for more details>>> Return & Exchange Policy
    SKU: 56552614022

    Discover Niche Categories That Outsell kinderfahrrad early rider 20 zoll

    Top-Converting Item to Boost Your Average Order

    4.1 ★★★★★
    Based on 5 reviews
    Sort
    Highest Rating
    Newest First
    Oldest First
    Product Reviews
    J
    Verified Purchase
    Joseph E. Brackman
    Pawtucket, US
    ★★★★★ 4
    Fantastic style, good stability, customizable finish, and great customer service
    Size: M Desk Unfinished 3/4-in and 1/2-in
    Put this together in about April 2020 right about the crazy lockdown/quarantine/work-from-home timeframe. I knew that I wanted a simple hardwood desk with no drawers or stuff below the top. I have an ergonomic keyboard tray that I have attached to all my work desks for many years now, and it was too long for my old home desk, which was also made of MDF and was falling apart. Boo. Enter this kit plus a butcher block top from the big box store. This kit went together easily. I had lost the instructions but a quick email to the JS Supplies company, and they hooked me up. By the time they sent it, I had actually figured out the part that was puzzling, which was what the all-thread pieces were for (the couplers between the elbows and the flanges on the top side). I degreased all the parts with a simple Simple Green-type solution diluted in a 5 gallon bucket. I then sprayed the pieces with a satin nitrocellulose laqcuer (Minwax brand that I got from the home improvement big box). Worked great. I thought about doing a sealed rust finish using a science project volcano--vinegar and baking soda for a quick layer of rust on the outside--but I decided against it, as I wasn't sure of how stable the final product would be, even after a clear spray finish. The satin nitro finish looks great without even looking like a finish. I also coated the pieces with paste wax after the finish dried, just for good measure. The one thing that is a bit disappointing is the stability... WITH MY TOP, mind you.I should be clear that the top that I'm using is a 1-3/4" thick monster piece of birch butcher block that is 60" x 30". I'm guessing that it's 40-50 pounds? Maybe more. This is probably WAY more weight than this leg set is made for. I also have the aforementioned keyboard tray that sticks out (torque equals force times lever arm) and causes even more torque. I get some shaking with the top with this setup. I have the desk on carpet; I was concerned that maybe the carpet and pad were not giving enough stability with the feet, so I made some plywood platforms for the feet. I also carefully leveled the feet to make sure it wasn't just uneven legs that was causing the instability. Still shakes no matter what I tried. I think it's just that I have such a heavy top--more than this thing is spec'd for. That's totally fine, and I don't want to knock off a bunch of stars for that. I leave these comments more as a "don't do what I did" thing. Just be advised that you need to limit the weight of the top to something reasonable. The design of one upright on each side of the desk with a pipe coupler in between is probably the weak spot with my heavy desktop; I'm thinking of either adding tension on either side (with some threaded rod and turnbuckles) or some extra supports with something like the Steel-Tek pieces from Lowe's. Overall, I'm very satisfied with the product and the company!
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on June 23, 2020
    R
    Verified Purchase
    Russel
    Charlottesville, US
    ★★★★★ 5
    So nice I bought twice!
    Size: H Desk Unfinished 3/4-in and 1/2-in, Size: H Desk Unfinished 3/4-in and 1/2-in
    For starters, this is a great buy if it is exactly what you want. For me that was the case and it would have cost me a good $40 or more to replicate it at a big box store. With that said, if you are not planning on using all of the pieces and want a different configuration, this may not be the kit for you. All of the parts inside are just like if you bought it at a local home improvement store. All the pipes need to be cleaned and protected. I personally found that dish soap (dry off immediately after you clean a piece) was the easiest to clean everything and I finished it with some wax. The kit is sturdy and easily supports the weight of my butcher block tops. I inverted the kit as it is designed as I intend on adding a shelf and am planning on using the support brace to aid in holding that shelf up for cable management. After cleaning and protecting, putting the kit together only took 5-10 minutes and that was with kid disruptions. I purchased 2 so that my wife and I could have matching desks in the office and I couldn't be happier.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on August 23, 2019
    C
    Verified Purchase
    Colauhu
    Los Angeles, US
    ★★★★★ 5
    Durable and sturdy. I bought two
    Size: H Desk Unfinished 3/4-in and 1/2-in
    Love the kit. I ordered two to make an L-shaped desk for my home office. Perfect height, looks cool, and sturdy. Slightly tricky to get two of them to the exact same height but you can adjust them buy loosing/tightning parts. Way cheaper than going to the hardware store and buying the same parts. I wiped each piece down as they are a bit dirty/greasy, but no big deal.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on August 9, 2021
    G
    Verified Purchase
    Gigi
    Natrona Heights, US
    ★★★★★ 5
    Great legs - sturdy when fully assembled with tabletop.
    Size: H Desk Unfinished 3/4-in and 1/2-in
    These legs are great. I put it together with a butcher block tabletop and it turned out beautifully. I recommend using a level on the legs once you get them into position and again when you place a top on it. The screws included were so easy to screw into the block but that will vary depending on the top you select. Watch the videos another reviewer posted on cleaning the legs with a mild soapy water and dry them thoroughly. It really helped me. Also after it was all assembled I used a clear acrylic - in a spray can to clear coat and seal the legs. I am really happy with it.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on July 4, 2020
    R
    Verified Purchase
    Ronald D Smith Jr
    Boise, US
    ★★★★★ 5
    Perfect
    Size: 16 Inch
    Exactly what I ordered, took just a few minutes to assemble and mount the legs. Love that the bottoms can be manipulated to give a balanced stance.
    WAS THIS REVIEW HELPFUL?YesReportShare
    Reviewed in the United States on February 23, 2026

    recommand products

    Fahrradanhänger Babysitz 1 Sitz Einsatz
    22.32
    Borgen Clips für Thule Anhänger » Für Laufrad und Kinderfahrrad – forriders.de
    23.23
    Qeridoo Adapter für Autobabyschale (ab 2020/2021)
    20.63
    Borgen Clips für Thule Anhänger » Für Laufrad und Kinderfahrrad – forriders.de
    26.25
    CUBE Kupplung Universal Fahrradanhänger
    20.99